Electro-hydraulic Arm-shaped disc brake

Electro-hydraulic Arm Disc Brake passes ISO 9001 quality .
Our  Brake ,port machine brake, industrial brake.

Electro-hydraulic Arm Disc Brake ,port machine brake, industrial brake,safe,efficiency and reliable.

In accordance with German DIN 15435 standard.

 

Electro-hydraulic Arm Disc Brake Main feature:
1.Equal clearance device can always keep the clearance equal at both sides of the brake shoes during the application.

Main swaying hinged points are equipped with self lubricated bearings with high efficiency of transmission and long service life.Lubrication is no necessary during the application.

The brake spring is arranged in the square spring tube and the scale of brake torque is set at one side.The brake torque is shown directly,which is convenient and direct for adjustment.
The asbestos free brake linings are of insertion type,which is convenient and quick for replcement.

The automatic compensation device can keep the clearance of the hrake shoes and the brake torque constant druring the application.
Some addtional functions can be realized by increasing the addtional devices.

2.The brake Manual relase
3.Released or closed postion limit switch can realize the signal indication of whehter the brake is normally released or closed.
4.The excessive wear limit swithc can realize the automatic signal indication when the brake linings are worn to te limit value.
5.The Ed series thrusters adapted with the delay valve can realize the delayed engagement of the brake featuring in smooth braking.

 

Electro-hydraulic Arm Disc Brake Operating conditions:
1.Brake Ambient temperature:-20°C-+50°C

2.Brake relative humidity no higher than 90%.
3.General used for AC power of 380V,3 phase,50HZ(Version for 60HZ or voltage other than 380V can be supplied on request).
4.Sea level altitude:in accord with GB755-87,At temperature lower than -20°C

,aero-oil YH-10 should be used as pressure fluid for else a heater must be added.Please see the techninal manual of Ed thruster.